318 POLY Elec. Ignit. Kit

[Baydo]

Looking for a place to purchase a complete 318 POLYPoints to Electronic Ignition Conversion Kit
Every place I go they only have kits for the LA 318
I need one for a 1966 318 Poly
Any advice is greatly appreciated.
Thank you

 

[alsant]

Petronics worked great on my poly with the Petronics coil too. Got pretty descent deal off eBay. Very easy to install .

Check out the yahoo poly group a lot of good people and alot of good info on the poly

 

[Baydo]

Thanks!

 

[Dako]

I got the distributor for my Poly from Skip White www.skipwhiteperformance.com

They provided great troubleshooting help, right over the phone(!) and had me a new module in a couple days. I haven't had a problem with the distributor since. All electronic parts are self-contained within the dizzy. Only mod was to 'gut' the ballast resistor and solder in a piece of wire. If you are not concerned about appearance, you can simply make a jumper wire and connect the wires together. Give them a call.

 

[Darter6]

LA and Poly will use the same kit. I too use the Petronix points conversion in my Poly

 

[theman440]

I've heard the LA kit works on the Poly.