69L48Z27
Well-Known Member
Your missing a few steps in between.
Clay bar
Polish - usually two steps, swirl remover type grade then fine polish
Sealer (optional)
Wax and/or glaze
If you don't polish the wax won't matter, this is where the shine comes from. I started using Adams stuff a couple years ago. Good stuff and they have a lot videos and a forum.
You only need a buffer if your wet sanding. Everything listed above works good by hand.
Clay bar
Polish - usually two steps, swirl remover type grade then fine polish
Sealer (optional)
Wax and/or glaze
If you don't polish the wax won't matter, this is where the shine comes from. I started using Adams stuff a couple years ago. Good stuff and they have a lot videos and a forum.
You only need a buffer if your wet sanding. Everything listed above works good by hand.