FOR SALE 64 polara part out

Mopar Parts Cars/Parting out

Thread Status:
Not open for further replies.
  1. Wtrfwl havoc

    Wtrfwl havoc Well-Known Member

    Messages:
    69
    Likes Received:
    31
    Joined:
    Aug 5, 2019
    Location:
    Kansas
    Local Time:
    1:47 PM
    Contact Seller
    Got a 64 dodge polara I am parting out. Poly 318. Engine turns over with starter. I got it to fire and run for about 5 seconds on carb cleaner. I couldn’t get it to fire again after that. 727 push button transmission. Tapered 8 3/4 rear axle. Factory a/c car. Power steering. Pretty much everything up for grabs minus the dash, radiator, shroud, some of the a/c components, and a few of the trim pieces. I will cut it up or whatever you need. I finally got it in the shop to start taking apart. Some of you might have talked to me in the past. Sorry it’s taking so long. Been out of town the last 2-3 mths. I am not a business so I don’t get real great shipping prices. Located in central Kansas. Message me on here if interested.

    1BAAC52D-7D4E-4D99-97F1-D2B3444A4813.jpeg E87C19EB-85A3-4DBB-9CC0-728C69D2DD2A.jpeg 454CC0C8-014F-4FE9-801F-9C2B3E1B048B.jpeg 37646992-CF04-42F7-8C66-439EAB65FE46.jpeg AB1D4750-07FC-44AB-9E59-CFFDD3D344D9.jpeg B1217041-DF63-487F-BDCE-D79E43C33214.jpeg 99C64D8B-6088-45D5-81A1-33CA5DB89AFF.jpeg
     
  2. moparcrazy

    moparcrazy Well-Known Member

    Messages:
    2,273
    Likes Received:
    1843
    Joined:
    Dec 27, 2009
    Location:
    california
    Local Time:
    1:47 PM
    PM Sent !
     
  3. Buckeye

    Buckeye Well-Known Member

    Messages:
    51
    Likes Received:
    9
    Joined:
    Dec 27, 2011
    Location:
    Ohio
    Local Time:
    2:47 PM
    PM sent.
     
    • Like Like x 1
    • 19polara64

      19polara64 Well-Known Member

      Messages:
      260
      Likes Received:
      87
      Joined:
      Dec 29, 2011
      Location:
      Brier, Washington
      Local Time:
      11:47 AM
      How are the front floors? Also how’s the chrome on the wing windows and frames? Thanks Rene‘ ps your inbox is full
       
    • Wtrfwl havoc

      Wtrfwl havoc Well-Known Member

      Messages:
      69
      Likes Received:
      31
      Joined:
      Aug 5, 2019
      Location:
      Kansas
      Local Time:
      1:47 PM
      floors are shot. I believe the chrome around the wing windows and frames are good. I will look tomorrow. I tried to message you and it says your inbox is full
       
    • 19polara64

      19polara64 Well-Known Member

      Messages:
      260
      Likes Received:
      87
      Joined:
      Dec 29, 2011
      Location:
      Brier, Washington
      Local Time:
      11:47 AM
      Thanks. Inbox is empty now
       
    • 6872n73

      6872n73 Well-Known Member

      Messages:
      272
      Likes Received:
      257
      Joined:
      Apr 5, 2010
      Location:
      Oklahoma
      Local Time:
      1:47 PM
      Tail light panel?
       
    • 6t4polara

      6t4polara Well-Known Member

      Messages:
      718
      Likes Received:
      272
      Joined:
      Mar 11, 2011
      Location:
      Mi.
      Local Time:
      1:47 PM
      PM sent
       
    • Ski 61701

      Ski 61701 Well-Known Member

      Messages:
      856
      Likes Received:
      678
      Joined:
      Nov 21, 2016
      Location:
      Bloomington Illinois
      Local Time:
      1:47 PM
      By chance do you have the hood safety latch, and if so is the spring still hold tension that allows the latch to engage the core support?
       
      • Thanks! Thanks! x 1
      • old guys rule

        old guys rule Well-Known Member

        Messages:
        760
        Likes Received:
        234
        Joined:
        Sep 14, 2016
        Location:
        Jacksonville, FL
        Local Time:
        2:47 PM
        What would you take for the tail panel where the backup and parking lights are including all the lights
         
      • old guys rule

        old guys rule Well-Known Member

        Messages:
        760
        Likes Received:
        234
        Joined:
        Sep 14, 2016
        Location:
        Jacksonville, FL
        Local Time:
        2:47 PM
        Actually I just need the light assemblies
         
      • fuseable

        fuseable Active Member

        Messages:
        41
        Likes Received:
        71
        Joined:
        Jul 22, 2012
        Location:
        Kansas City
        Local Time:
        1:47 PM
        How are the front fenders?
         
      • Wtrfwl havoc

        Wtrfwl havoc Well-Known Member

        Messages:
        69
        Likes Received:
        31
        Joined:
        Aug 5, 2019
        Location:
        Kansas
        Local Time:
        1:47 PM
        they are really pitted and would need restored
         
      • Wtrfwl havoc

        Wtrfwl havoc Well-Known Member

        Messages:
        69
        Likes Received:
        31
        Joined:
        Aug 5, 2019
        Location:
        Kansas
        Local Time:
        1:47 PM
        Pm me you email or phone and I can send pics. The fenders are pretty rusty on the back bottom corners and would need repaired
         
      • old guys rule

        old guys rule Well-Known Member

        Messages:
        760
        Likes Received:
        234
        Joined:
        Sep 14, 2016
        Location:
        Jacksonville, FL
        Local Time:
        2:47 PM
         
      • old guys rule

        old guys rule Well-Known Member

        Messages:
        760
        Likes Received:
        234
        Joined:
        Sep 14, 2016
        Location:
        Jacksonville, FL
        Local Time:
        2:47 PM
        So are mine. I just don't have backup light. Can you measure yours? Mine are 16 by 3 and 1/2. Nix that. Mine are too different.
         
      • 47dodgeman

        47dodgeman New Member

        Messages:
        2
        Likes Received:
        0
        Joined:
        Jun 6, 2014
        Location:
        North Carolina
        Local Time:
        2:47 PM
        Do you still have the windwhield wiper linkage? If so please send a picture and what you would want for the unit>
         
      • Fury 440

        Fury 440 Well-Known Member

        Messages:
        184
        Likes Received:
        344
        Joined:
        Aug 20, 2021
        Location:
        Ontario, Canada
        Local Time:
        2:47 PM
        Hi! I really need a complete cowl for my 64 Sport fury. I'm pretty sure that Dodge/Plymouth are the same for that year. I know that it is a huge job to drill all the welds, but I would be happy to take a "rough cut" and do the drilling myself. Can you help? Please get back to me when you can. THANKS!!
         
      • justjim

        justjim Well-Known Member

        Messages:
        408
        Likes Received:
        81
        Joined:
        Feb 27, 2018
        Location:
        wisconsin
        Local Time:
        1:47 PM
        your inbox must be full
         
      • funnycar

        funnycar Well-Known Member

        Messages:
        228
        Likes Received:
        33
        Joined:
        May 5, 2009
        Location:
        ankeny iowa
        Local Time:
        1:47 PM
        any interest in selling the engine compartment wire loom .
         
      Thread Status:
      Not open for further replies.
      1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
        By continuing to use this site, you are consenting to our use of cookies.