66 Conv Parking brake routing with frame connectors

[m300b]

Added weld on frame connectors and torsion bar frame repair caps on a 66 Belvedere convertible 20 years ago. Ran the brake lines but can not figure out how to run the front parking brake line through the "frame". There are no good pics in the Chassis Assembly Manual or Service Manual.
Thanks,

 

[eldubb440]

go through the connector.....i marked a line where the cable runs and drilled holes......then got a little fancy and slid a tube through it


it's there

 

[pnora]

I did mine. Just made a line from the cable where it came through the frame to the floor pan guide. Made a slot inside and outside of the frame tie.

 

[m300b]

go through the connector.....i marked a line where the cable runs and drilled holes......then got a little fancy and slid a tube through it


it's there

View attachment 1982795

Great idea! Thanks,

 

[m300b]

I did mine. Just made a line from the cable where it came through the frame to the floor pan guide. Made a slot inside and outside of the frame tie.

View attachment 1982838

View attachment 1982839

View attachment 1982840

View attachment 1982843

Thanks for all of the quick responses!

 

[Dennis H]

69.

 

[493 Mike]

My former 66 with flush cut tube through the subframe connector:
Mike

 

[m300b]

Thanks for everyone's help.