67 belvedere street\strip

[groundhogslayer]

67 belvedere

440- .030, kb 236's
H beam rods
Stock crank ground .010 and .010
Edebrock 88 cc rpm heads
Comp xe 295-hl
1.5 roller rockers
Victor 440 intake
850 quick fuel tech carb
Indy valve covers

727- full rebuild with b&m trans pack, reverse manual vb, 10 inch 4k stall
Deep sump aluminum pan.

Hooker super comp 2 inch tube, 3 1\2 collectors into 3 inch x pipe and 40 series flowmasters

8 3\4 with 3.91s, mini spool, hardened shafts, back brace.

4 wheel discbrakes, coil overs, caltracs, tubular upper control arms,

6 point cage, aluminum adjustable seats, updated fuse box, sumped fuel cell, electric fue pump, 1\2 inch braided fuel line.

Lots of other upgrades, but that's the major goodies. Looking for a quick sale.

Asking 7,000 car is located in new freedom, pa

 

[Moparcrazy.com]

:confused4:

 

[groundhogslayer]

what are you confused about?

 

[alleyoopmgv]

How fast is it? Just wondering?

 

[groundhogslayer]

never run it at the track. if it got traction it feels like a mid 11 second car. it pulls really hard in mid to top end.

 

[forty4blu]

Do you have any more pictures of it or anymore information? When was the last time it was drove or ran? Do you have anymore 67 parts?

 

[groundhogslayer]

I can take whatever pictures you like. The starter let go and I have it out,but havnt put a replacement on. Otherwise it runs. Hasn't been driven in about a year. Its not tagged. the shifter is not hooked up yet, still installing the new one that is in the picture.