Big Cocke build

[murfman]

Ordered the 2 1/8” stepped headers and 3” exhaust from TTI and I’m dropping off the exhaust to get it ceramic coated at LoKo Monday, I also picked up a CVF Wraptor and Classic industries AC system as well. Should be a busy winter.

 

[murfman]

Picking up the long block this weekend, and after much soul searching I decided to bite the bullet and order a TKX from Silver Sport. I’ll either sell the Cope 46/47RH or store it away for a future project.

 

[Belvedere408]

Good choice on the TKX nothing better than country roads shifting gears.

 

[murfman]

Got the Wraptor mocked up.

 

[murfman]

Even the hidden parts a pretty lol

 

[murfman]

 

[Dave6T4]

View attachment 1927378

Wow! Looks pretty busy up front.

 

[murfman]

Wow! Looks pretty busy up front.

Everything is down low and looks very clean installed in the car

 

[murfman]

Sniper 2 showed up along with the Hyperspark. Im modifying my old Lakewood bell housing to work with the TKX, things a progressing finally

 

[kreauto]

Is your rear cam plug out for a reason?

 

[murfman]

Is your rear cam plug out for a reason?

It’s in there

 

[murfman]

Mounted my bellhousing to check runout and my go-no go gauge fit right in! I’d rather be luck than good. Next is to weld in the weld nuts for the TKX bolt pattern, starter bolts, and the block plate holes so I don’t have to fight the nuts if I have to disassemble it in the future

 

[murfman]

Things sure get tight right here, but everything clears, I’ll mount my spare steering box this week and get the hoses made and plumbed.