• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Cool that carb...

runner74

Well-Known Member
Local time
5:59 AM
Joined
Nov 11, 2014
Messages
107
Reaction score
20
Location
MA
Could anyone recommend the best carb spacer to keep the carb cooler?

Stock 400 cubes with 4 barrel carter AFB (9636A 1707), hp manifolds.

Suspect fuel boiling off when shut down hot can be a little hard to start when still hot.
 
1/2 inch phenolic. Spelling? Move and wrap fuel lines. Use your favorite ethanol-fighter, min is Amsoil 100:1 marine. An ounce per tank.
 
I ran a -6 AN line from the Carter fuel pump in insulation wrap away from the block and over by the inner fender well and a phenolic spacer to keep the fuel from boiling in a 69 Daytona to lessen that issue in southern california heat.
 
Auto Transport Service
Back
Top