Cylinder condition

[71RRHI]

In Less than 1 hour you post it forsale for $1200?

 

[340runner]

In Less than 1 hour you post it forsale for $1200?

Idk what it's worth to be honest, and I do have a person that said he'd do a grand, but he's a month or 2 out for getting money. He said its worth to him 800-1500$ depends on condition. I know the block is worth a lot more to a restorer than it is to me, so if someone wants it and is willing to pay is it not worth it? I never got the whole casting date and HP stamp craze but some do i guess. If could horse trade into a honeable standard bore block I'd rather do that as I already have a rotating assembly with l2295fs from another guy. If I bore over its waiting a lot of time and another 1k for machine work, then I need to drop 500$ on pistons, 150$ on rings, then spend another 500$ for balance and probably another 75$ or so for pressing the pistons

 

[71RRHI]

Idk what it's worth to be honest, and I do have a person that said he'd do a grand, but he's a month or 2 out for getting money. I know the block is worth a lot more to a restorer than it is to me, so if someone wants it and is willing to pay is it not worth it?

If he is willing to pay the money, I would say grab it.

 

[340runner]

If he is willing to pay the money, I would say grab it.

That's where I am with the situation
Side note is 1200 high? I honest to god do not know what a 69 hp block is worth. I mean obviously infinite to the right person, but I'm talking realistic numbers

 

[71RRHI]

I'm not a numbers type of guy. Unless it has the my vin stamped on it then to me it's just another 440 block. It's a little harder now a days, but I can still find a complete 440 with all the accessories for 500-700 as a core to rebuild

 

[340runner]

I'm not a numbers type of guy. Unless it has the my vin stamped on it then to me it's just another 440 block. It's a little harder now a days, but I can still find a complete 440 with all the accessories for 500-700 as a core to rebuild

Yeah, I just can't find those, I dont know if Hawaii is isolated from the rest of the country but I can't find a rebuildable forged crank with decent heads for under at least 1500$, and that's a block that is seized

 

[71RRHI]

I think finding parts in Hawaii is alot harder then the mainland USA. I'm not knocking you, if you can get 1k for the a bare block that needs machining. I'd say go for it. Here's one that listed on this site last month

FOR SALE - 67 440 engine

67 440 Standard bore non HP engine. 915 heads Turns over .Pretty much complete with 4 BBL intake. Looks like valve covers leaked and covered the engine with oil. $500.00. pick up in north central Indiana

www.forbbodiesonly.com

 

[66 Sat]

Why don't you try randys4406? He's a longtime member and seems to have a few engines for sale. Only 120 miles away from you.

 

[340runner]

Why don't you try randys4406? He's a longtime member and seems to have a few engines for sale. Only 120 miles away from you.

I honestly never even saw his posts before, I dont know how my searches are filtered by the search engine here, so it is a crap shoot as for what I see even if I only search in the want to sell forums. I base my prices and "value" on a lot of the parts and everything on the FB marketplace crapshoot

On another note I picked up a polished 440 forged crank, resized and new rod bolts and bearings, bushed for a floating 1.094 pin ly rods with l2295fs and NOS mopar "premium" ductile iron rings. The rotating assembly's balanced and I got it with a distributor drive shaft and a 1990 MP catalog for 580$. Now i either gotta get new pistons or find just ANOTHER block. Don't know if i over or underpaid for the rotating assembly, but it is what it is, no returning it haha

 

[pnora]

I honestly never even saw his posts before, I dont know how my searches are filtered by the search engine here, so it is a crap shoot as for what I see even if I only search in the want to sell forums.

On another note I picked up a polished 440 forged crank, resized and new rod bolts bushed for a floating 1.094 pin ly rods with l2295fs and NOS mopar "premium" ductile iron rings. The rotating assembly's balanced and I got it with a distributor drive shaft and a 1990 MP catalog for 580$. Now i either gotta get new pistons or find just ANOTHER block

You are doing things in the worse possible way. Buying parts in a shotgun pattern will cost you more in the end. You start with a block and get the right piston size and go from there.

 

[340runner]

You are doing things in the worse possible way. Buying parts in a shotgun pattern will cost you more in the end. You start with a block and get the right piston size and go from there.

But then I have to pay twice over on machining costs when I buy everything else piecemeal, no? At least with this i can just get the 30 over piston and they're close on weight instead of having to resize rods and polish the crank and balance. I quoted a couple machine shops, all in on the rotating assembly I was at least 1300$ in on labor
As for the shotgun pattern, yeah, it is inefficient but some day ill find use for it all, still got a lot of life ahead of me, im 17 not 70

Lmk if I'm thinking about this wrong

 

[pnora]

But then I have to pay twice over on machining costs when I buy everything else piecemeal, no? At least with this i can just get the 30 over piston and they're close on weight instead of having to resize rods and polish the crank and balance. I quoted a couple machine shops, all in on the rotating assembly I was at least 1300$ in on labor
As for the shotgun pattern, yeah, it is inefficient but some day ill find use for it all, still got a lot of life ahead of me, im 17 not 70

No you will not pay a machine shop twice. But the way you are going you will pay twice.

 

[pnora]

But then I have to pay twice over on machining costs when I buy everything else piecemeal, no? At least with this i can just get the 30 over piston and they're close on weight instead of having to resize rods and polish the crank and balance. I quoted a couple machine shops, all in on the rotating assembly I was at least 1300$ in on labor
As for the shotgun pattern, yeah, it is inefficient but some day ill find use for it all, still got a lot of life ahead of me, im 17 not 70

Lmk if I'm thinking about this wrong

As far as being 17 and not 70 tells me you have a lot of time to be stupid. Don't take it in a bad way. The fact is one day when you reflect on the decisions you made you will say boy was I stupid. Why did I not listen.

 

[BSB67]

………If could horse trade into a honeable standard bore block I'd rather do that as I already have a rotating assembly with l2295fs from another guy.

Just understand that the odds are against you.

You are looking for a 50 to 60 year old 440 block that you can home-hone for your forged pistons, correct? You sound like you are in a hurry, correct?

Have you asked your matching shop to hone your current block, maybe for a special price. They generally don’t like to do that. But what ever you do, you’ll still need to add about 0.002” to the bore to get the right clearance for the 2295 pistons.