dart master cylinder

[Dan T]

question: I am putting new brake lines and all parts on my 62 dart, I am using 3/16 lines for rear and front (rear drum/front disc) I would like a good recommendation for the master cylinder (will not be using booster)

thanks in advance

 

[493 Mike]

I like the aluminum, 2 bolt Mopar style. You will need a adapter plate (make one) and may need a adjustable push rod. Just use a adjustable proportioning valve to tune the bias pressures.
Mike

 

[Dan T]

I like the aluminum, 2 bolt Mopar style. You will need a adapter plate (make one) and may need a adjustable push rod. Just use a adjustable proportioning valve to tune the bias pressures.
Mike

Thanks for the information, I will get it put together

 

[matthon]

Did it on my 62 with these parts:

Adjustable Proportioning Valve
Mopar Aluminum Master Cylinder Kit