DePouli's 1969 Charger 318

[Brian DePouli]

Front to back brake line is in. I have 3 clips from the repro set that I have no idea where they go.

 

[Brian DePouli]

The front to back fuel line is also a challenge so far.

 

[dadsbee]

 

[Brian DePouli]

Ok fuel line 180 and it fits great... Duh...

Repro stainless rear axle brake lines don't fit, which I kinda knew about ahead, but was gonna give them a shot... Cleaned up and painted the OEM steel ones instead.

 

[Brian DePouli]

Thanks Dadsbee that helped a bunch.

 

[daytona kid]

Helped me to, I gotta put a clamp on mine brake line there.

 

[The Rebel]

Looking great!

 

[Brian DePouli]

Trans linkage...got to paint the pan...

 

[Brian DePouli]

Where does this go?

 

[Brian DePouli]

Flywheel cover and starter in...Motor to trans bracing is partially in as I may still trying to figure out which bolts go where... Didn't label well I guess

 

[Brian DePouli]

Is there supposed to be a donut or other seal from the manifold to the exhaust pipe?

Perhaps this?

 

[Brian DePouli]

Bought these super bright LEDs for the kids to light up the back yard so they could play after dark, but they are very handy for under car work.

 

[dadsbee]

Where does this go?
View attachment 688441

 

[Brian DePouli]

Finally got a helper involved on the driveshaft.

 

[Brian DePouli]

Va bene!

 

[Brian DePouli]

Passenger side pipe is in...

 

[Brian DePouli]

And the tail section of the drivers side...not gonna do the rest of the drivers side until iput the trans cooler lines in (which I haven't bought yet)

Never had exhaust tips before on this car, looks great, took me a couple minutes to figure out how to mount the tip mount.

 

[Brian DePouli]

Tank is in...

 

[Brian DePouli]

Fan installed

 

[Brian DePouli]

Finished the brake lines at the MC and across the fire wall. Still have to check the wheel cylinders and hook those up. But definitely want brakes before I start the engine....cause I'm going to want to go for a spin...