Edelbrock spacer

[1967 satellite]

can anyone explain or correct what I have. See picture. Top is a gasket against carb. Next is a spacer about 3/16” thick, next is a steel spacer and finally a gasket on the manifold. Thanks.

 

[pnora]

You have an adapter plate square bore to spread bore.

 

[Bee1971]

A Mess

Better yet , first take a picture or let us know what intake manifold you are using

I would assume an Edelbrock Carb also

 

[BeepBeepRR]

Looks like someone was trying to fix fuel boil.

 

[BSB67]

We cannot help you without carb and intake info.

 

[PurpleBeeper]

It’s a carburetor adapter (spread bore/square bore) with a heat insulator spacer

 

[Geoff 2]

I will refer to the parts by referencing the carb openings.
- gasket on the intake is for a AFB/AVS or Holley 41X0 carb.
- next one up. Fits same carbs but is thicker material to act as heat shield.
- next one up. Adapts a spread bore [ QJ or TQ ] to sq bore such as AFB, AVS, Hol 41X0.
- top gasket. For Hol, AFB etc, but it has been used QJ or TQ & might have leaked.