Coronet R/T 68
Active Member
Looking to see if anyone has had any experience with custom cam grinds for a 505 stroker? Or possibly off the shelf? I'm looking for as much torque in the low end that I can get for cruising speeds (1500-2300 rpm) it's a restomod that I drive alot (power tours, and a up and coming route 66 trip) trying to get the best fuel milage possible.
Motor is a 505, super sniper efi, ported sidewinder heads, 10:1 compression, edelbrock rpm dual plane intake, currently has a comp cams XR286-10 cam. Runs good over 2500 rpm but not where I want it on the lower rpms. Cam is 110 lsa but would like a 112 to help with idle/low rpm tuning.
Trying to put together a list of companies people have used so I can compile a list of people to call and talk to
Motor is a 505, super sniper efi, ported sidewinder heads, 10:1 compression, edelbrock rpm dual plane intake, currently has a comp cams XR286-10 cam. Runs good over 2500 rpm but not where I want it on the lower rpms. Cam is 110 lsa but would like a 112 to help with idle/low rpm tuning.
Trying to put together a list of companies people have used so I can compile a list of people to call and talk to