Factory Sway Bar

[dcmason69]

Does a factory sway bar from a 68 charger interchange with a 69 Coronet?
and if so does the hump go over the brace from the radiator support to K member
or under?
Saw one on 68 charger that the hump was pointed down under the brace, that cant be
correct or am i missing something?
Hope someone can weigh in on this.
dcmason69

 

[T2R9]

Yes and yes.

 

[Dave6T4]

Same bar, hump goes up over brace.

 

[T2R9]

The only thing that could be different is if the 69 Coronet did not have a factory bar then the end link tabs will be missing on the lower control arms. I believe they are available aftermarket.

 

[dcmason69]

The only thing that could be different is if the 69 Coronet did not have a factory bar then the end link tabs will be missing on the lower control arms. I believe they are available aftermarket.

OK that is what I thought,
Thank You
So say a person put a factory Sway bar on upside down what does that do to the handling of the car?

 

[Dave6T4]

OK that is what I thought,
Thank You
So say a person put a factory Sway bar on upside down what does that do to the handling of the car?

Put it on its roof. Ha ha

 

[dcmason69]

Not much as it would be doing it’s job. Kim

I suppose it would still do its job just wonder if it would make the car steer funny going over dips?
Also the hump down makes less ground clearance would you agree?

 

[T2R9]

It would take less than an hour to reinstall the bar correctly. No reason not to.