- Local time
- 6:55 PM
- Joined
- Feb 22, 2021
- Messages
- 2,773
- Reaction score
- 5,470
- Location
- Roswell, New Mexico
Hey all, at a loss as this is my first big block
Mopar build.
What should I set the fast idle rpms to.?
The factory settings on the 750 cfm quick slayer
put the rpms close to 2000. To my ear, this sounds
way to high, and I'm getting slight lifter rattle on
cold start. The 440 is basically stock, w/50
psi cold. Cam is 230/230 at .05/480 lift/109lsa.,
727 trans, 2800 stall conv. Warm idle- park-= 900
rpm/in gear=600rpm. This engine is barely past
break-in and has not been driven as of yet.
Thanks in advance for your valued input.
Mopar build.
What should I set the fast idle rpms to.?
The factory settings on the 750 cfm quick slayer
put the rpms close to 2000. To my ear, this sounds
way to high, and I'm getting slight lifter rattle on
cold start. The 440 is basically stock, w/50
psi cold. Cam is 230/230 at .05/480 lift/109lsa.,
727 trans, 2800 stall conv. Warm idle- park-= 900
rpm/in gear=600rpm. This engine is barely past
break-in and has not been driven as of yet.
Thanks in advance for your valued input.
Last edited: