Favorite oil

[RJRENTON]

My Eyetalyun bikes get EVOO.

Looking at Olive its no wonder she's extra virgin.

Back in the days of racing go-carts, the standard fuel was a mixture of methanol @ 60% (+/-) and 30% (+/-) nitomethane and 10% (+/-) castor oil. The more nitro in the mix, the more castor oil added and less methanol. These were little McClough 2 cycle you could buzz up to 10,000 RPMs with one (sometimes none) piston ring with 0.0015 wall clearance.....scattered a few but won more than lost.....
BOB RENTON

 

[Paul Boucher]

Used VR1 and really like it, but just some Driven GP-1 to try out. Has me intrigued. Here’s a good article on it.

https://www.pca.org/story-behind-drivens-new-gp-1-oils

 

[62440]

Interesting article. I think I'll try VR1 next oil change. I've never seen Driven GP1 around here, but I'll keep my eye open for it. Oil additive packages have certainty changed over the years. Lot's of good oils around now.

Used VR1 and really like it, but just some Driven GP-1 to try out. Has me intrigued. Here’s a good article on it.

https://www.pca.org/story-behind-drivens-new-gp-1-oils

 

[Slap Stick]

Back in the days of racing go-carts, the standard fuel was a mixture of methanol @ 60% (+/-) and 30% (+/-) nitomethane and 10% (+/-) castor oil. The more nitro in the mix, the more castor oil added and less methanol. These were little McClough 2 cycle you could buzz up to 10,000 RPMs with one (sometimes none) piston ring with 0.0015 wall clearance.....scattered a few but won more than lost.....
BOB RENTON

Hence the name Castrol.

 

[Redsat]

I was just curious about everyone's favorite oil ? Might be interesting to see if there is "One Stand Out".

TriboDyn made exclusively in the USA and if yo go to there site you will see how most of the oils talked about here did not come close in independant testing . Worth a look !