Huicho417
Well-Known Member
- Local time
- 10:06 AM
- Joined
- Sep 15, 2020
- Messages
- 344
- Reaction score
- 127
- Location
- San Antonio , Texas
I finally got around to adding a fuel return line. I’m routing it from the return side on the bottom of the fuel pressure regulator. I did have to drill a hole in my fuel sender for a fitting I sourced online. Really not that difficult. I am going to attach a hose to the fitting to make sure the hot fuel dumps along the bottom. Tried really hard to find a sender that allowed for a return line but never found one. This modification is to fix the vapor lock issue I constantly have.
Just in case anyone is looking into doing this as well.
Just in case anyone is looking into doing this as well.