Did you try any of that slick-ease(?) or some such for pulling wires? Used to use it when making wire conduits on buses. Don’t remember the name, but it was like lard consistency and would slowly evaporate.
Finally time to pull the trigger . . . starting on the New (much anticipated) SHOP - Build
- Thread starter conv67bdere
- Start date
Olwhite63
Well-Known Member
- Local time
- 10:25 AM
- Joined
- Nov 3, 2020
- Messages
- 69
- Reaction score
- 99
- Location
- High Plains of South Dakota
Yoo-hoo - been awhile since we've had an update on the coolest shop being built...
So Sorry - It has been a while - just dreading this Electrical Inspection . . .
Work is progressing - slowly - and it's ALL my fault as I'm dragging my feet with the electrical
due to my fear of the electrical inspection . . . but still making progress on the task
Got all of the lower floor bay work done - and the light outlets . . .
Got this work done on the silo - once I figured out what light that were getting installed . . . They are just Deck
lights - but they hug the wall and thought that prevent them from getting bumped all the time . . . maybe ? ? ?
This is the first light . . .
And the second light getting installed . . . appears that the 6 lights in the kit will work out just fine too !
Working my way up the spiral staircase and really liking the results . . .
And, when it was finished, the view from the top was awesome . . .
Getting dark outside so I checked out the lighting from the shop - happy with the results !
Not all work and no play . . . Obie bumped into this guy and he was not too happy, he went into "protect" mode
and attacked it - had to pull him off the King Snake and prevent him from hurting the guy - he's a very GOOD
snake to have around - and he's a BIG one to boot !
There were a group of these at a local eatery - and they all left together - was only able to get a pic when we
came to a stop - they were all pretty cool !
And - finally got the truck in to work on the bent frame from the accident - when the Toyota Tacoma drove
ringht into the back of the truck on the interstate . . . at least the receiver is now level - not pointing down . . .
And now working on getting all of the electrical circuits into the can and getting all of the circuit breakers
installed to handle them . . . moving along . . .
And working on trying to make sure that the wiring in the shop looks respectable for the inspection too
Yeah - dragging my feet but finally realizing that it needs to get done so I'm pushing myself a bit harder
to get this thing done and just fix anything that was done wrong and move on . . .
More Later . . .
Work is progressing - slowly - and it's ALL my fault as I'm dragging my feet with the electrical
due to my fear of the electrical inspection . . . but still making progress on the task
Got all of the lower floor bay work done - and the light outlets . . .
Got this work done on the silo - once I figured out what light that were getting installed . . . They are just Deck
lights - but they hug the wall and thought that prevent them from getting bumped all the time . . . maybe ? ? ?
This is the first light . . .
And the second light getting installed . . . appears that the 6 lights in the kit will work out just fine too !
Working my way up the spiral staircase and really liking the results . . .
And, when it was finished, the view from the top was awesome . . .
Getting dark outside so I checked out the lighting from the shop - happy with the results !
Not all work and no play . . . Obie bumped into this guy and he was not too happy, he went into "protect" mode
and attacked it - had to pull him off the King Snake and prevent him from hurting the guy - he's a very GOOD
snake to have around - and he's a BIG one to boot !
There were a group of these at a local eatery - and they all left together - was only able to get a pic when we
came to a stop - they were all pretty cool !
And - finally got the truck in to work on the bent frame from the accident - when the Toyota Tacoma drove
ringht into the back of the truck on the interstate . . . at least the receiver is now level - not pointing down . . .
And now working on getting all of the electrical circuits into the can and getting all of the circuit breakers
installed to handle them . . . moving along . . .
And working on trying to make sure that the wiring in the shop looks respectable for the inspection too
Yeah - dragging my feet but finally realizing that it needs to get done so I'm pushing myself a bit harder
to get this thing done and just fix anything that was done wrong and move on . . .
More Later . . .
Lookin good.
Similar threads
