Frankb
Well-Known Member
Almost ready for first engine start with engine in the car. Transmission, 727 by Protrans, has sat for about 2 years now. It was run on dyno but shipped dry so nothing in the pan. I put about 1/2 quart fluid in converter before converter install. How much fluid should I put in trans before engine start? It has a deep pan. Also I don't have a driveshaft yet but shifter is installed and adjusted. Any issues with running without a driveshaft? Shifter moves input shaft correctly through all gears. Verified visually. Trans has RMVB if that makes any difference. Waiting on a response from Protrans so I thought I'd run it by you guys also. Thanks
Frank
Frank