Front End FRIDAY!!!

[dadsbee]

 

[66ChargerHI-PO]

 

[chargervert]

I just started to reconfigure the lights on my 2010 Challenger. I did the same thing to my wife's Challenger a few years ago. I move the turn signals to the fog light housings and the fog lights to the inner headlight housings to make the lights look like 1970 Challenger lights. I cannot stand the inner headlights having the amber turn signals in that location. Hopefully by next Friday I will have pictures. It's more involved than I remembered but worth the effort when it is done. This is the before picture with the factory configuration.

 

[Hey-O]

In Memoriam!

She was a good person and a hard worker. I'm loyal that way.

 

[6PKRTSE]

I just started to reconfigure the lights on my 2010 Challenger. I did the same thing to my wife's Challenger a few years ago. I move the turn signals to the fog light housings and the fog lights to the inner headlight housings to make the lights look like 1970 Challenger lights. I cannot stand the inner headlights having the amber turn signals in that location. Hopefully by next Friday I will have pictures. It's more involved than I remembered but worth the effort when it is done. This is the before picture with the factory configuration.

View attachment 1864015

I remember you doing the switch to the lights on your wife's car and thinking that is how Chrysler should have built them. I have been wanting to do the same to my 12' as well, but after 13 years and still have not found the time to do so.

Someone, if I don't come up with it first needs to come out with a harness kit for this swap...

 

[chargervert]

I remember you doing the switch to the lights on your wife's car and thinking that is how Chrysler should have built them. I have been wanting to do the same to my 12' as well, but after 13 years and still have not found the time to do so.

Someone, if I don't come up with it first needs to come out with a harness kit for this swap...

View attachment 1864033

I agree. I had to extend the two turn signal wires on each side, but I was able to just unwrap the tape on the fog light wires and the reached the inner headlight pods with no trouble. We will see how it works out this time, the last time I had the bumper off the car this time I do not.

 

[66ChargerHI-PO]

 

[66ChargerHI-PO]

 

[66ChargerHI-PO]

 

[66ChargerHI-PO]

From a youtube video, for @dadsbee

 

[65hemi]

 

[Chongo 68]

 

[66ChargerHI-PO]

 

[Black_Sheep]

 

[Runner 68]

 

[66ChargerHI-PO]

 

[RR Fan Dan]

 

[66ChargerHI-PO]

 

[eldubb440]

 

[khryslerkid]

View attachment 1863987

I knew Chrysler was experimenting with turbines, i didn't know they were doing props too!