Lighthorseman
Well-Known Member
- Local time
- 10:50 AM
- Joined
- May 12, 2011
- Messages
- 173
- Reaction score
- 216
- Location
- Prince Edward Island
Firstly, my apologies for cross-posting on other forums, but I'm hoping that casting a wide net will find someone who can answer.
I picked up a gear drive for the 440 in my Road Runner, but when I removed the timing cover, I found that the cam that is installed is a single bolt type with a "key" for alignment. The gear drive appears to require three bolts. Is there some way to install this, or am I completely hooped?
Thanks in advance for any help!
I picked up a gear drive for the 440 in my Road Runner, but when I removed the timing cover, I found that the cam that is installed is a single bolt type with a "key" for alignment. The gear drive appears to require three bolts. Is there some way to install this, or am I completely hooped?
Thanks in advance for any help!