mopar4don
Well-Known Member
I just talked to my AMD re-seller about replacing the deck filler panel that I have, with a new one from AMD.
The panel I have is at least 6 years old and apparently the stamping was off. (Thanks to SGTPaul for pointing this out) It needs to be longer (left to right from the back of the car) by about 1/8 inch per side or 1/4 inch overall. (I verified this with the original rusty panel)
Well to make a long story short, I added that 1/8 per side but in the process I warped the panel.
So I was going to buy a new one from AMD but I asked my re-seller if he could check with AMD to be sure that they fixed the stamping.
I don't want to spend more money on something that is not right!
This is the message from my re-seller:
"It is the same stamping as the last time. They show no revision on that part In the computer"
SO I was hoping someone that has just bought one could get me a dimension across the length to verify there product is off.
Thank you
The panel I have is at least 6 years old and apparently the stamping was off. (Thanks to SGTPaul for pointing this out) It needs to be longer (left to right from the back of the car) by about 1/8 inch per side or 1/4 inch overall. (I verified this with the original rusty panel)
Well to make a long story short, I added that 1/8 per side but in the process I warped the panel.
So I was going to buy a new one from AMD but I asked my re-seller if he could check with AMD to be sure that they fixed the stamping.
I don't want to spend more money on something that is not right!
This is the message from my re-seller:
"It is the same stamping as the last time. They show no revision on that part In the computer"
SO I was hoping someone that has just bought one could get me a dimension across the length to verify there product is off.
Thank you