• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Headers for Performer RPM Heads

66Satellite47 said:
My '66 Satellite has TTI 2" with EDE RPM heads. They fit good. Spark plug access is OK once you figure out the procedure & have the correct length sockets
Click to expand...
I have those headers as well.
They also are routed to allow the use of the FAST Ratio Pitman and idler arms.

22C.JPG
 
They cleared FINE on my 69 RR 440, RPM HEADS. I think i had to dimple no 8 tube slightly for more plug boot clearance.
 
You must log in or register to reply here.

Similar threads

moparmarks
Eddy heads and headers
Replies
13
Views
1K
RemCharger
RemCharger
PeteyDaMan
Pinging 505 help
2 3
Replies
59
Views
4K
Meep-Meep
Meep-Meep
D
Collector flange hitting edge of trans pan
Replies
3
Views
348
68-500
68-500
S
Best heads for a budget 440?
2 3 4
Replies
61
Views
5K
Diodedog
Diodedog
C
Heads and Headers
2
Replies
21
Views
2K
Cranky
Cranky
Auto Transport Service
Back
Top