davek
Well-Known Member
Ok so how does the 6 clips go in for the trim piece? Do I cut the headliner were they go or just push them in? Will they be some what loose or tight? Thanks for any help,this weekend project.
Headliner question/help for front trim
- Thread starter davek
- Start date
- Local time
- 3:32 AM
- Joined
- Jan 29, 2018
- Messages
- 21,762
- Reaction score
- 69,477
- Location
- Midland Ontario, Canada
Push'm in the hole and GENTLEY squeeze the tabs to spread the rear wings. Use a soldering iron to start the hole...
davek
Well-Known Member
Wayne so I do the hole first?
- Local time
- 3:32 AM
- Joined
- Jan 29, 2018
- Messages
- 21,762
- Reaction score
- 69,477
- Location
- Midland Ontario, Canada
Ya, if you're glued across them... just burn a hole big enough to insert the metal bracket.
Dave, I'm glad you're ahead me in the process. I'm watching your progress & questions.
davek
Well-Known Member
Please learn from my mistakes.
I wish I never would have taken those stupid brackets off...no matter what I tried I couldn't get them to relock back in with any confidence. Didn't want to chance them falling out later, once the windshield is in, you're blocked out.
I ended up running a screw in to hold them good.
I ended up running a screw in to hold them good.
Those clips look like the ones on my 65 Belvedere. I modified the clips and installed nut serts and 10-32 screws to retain them.
Mike
Mike
Similar threads
