WTB Holley rear bowl (early dual feed) poor condition is okay

[sam dupont]

Need one for a mock up that I will grind and sand to make fit. So stripped threads, crack, or corrosion will work fine. Don't need the float or small parts, just the bowl.

 

[PurpleBeeper]

if you get stuck, it's the same a front/rear six pack bowl (ask me how I know) and you can buy them new (if you must) from Chicago Carburetors. "Dimensionally" all the v-bowls are the same, front or rear, unless you need to mock up & clearance something to do with which side the fuel line comes in on and/or an accelerator pump

 

[sam dupont]

Thanks BP,
I have an outboard 6 Pack carb. It's a good carb, or I would experiment on it. I'd buy a whole 6 Pack outboard carb that is not rebuildable if I could.