How about just a random picture. NOT the entire car

[dadsbee]

3/8 SPD red paint St. Lou. @dadsbee for earlier car.

Lynch Road December '65.. body colour

 

[autoxcuda]

New AMD mini tubs in progress by ns1rm21

The small angled piece is an example of the stretched and shrunk piece that was made to add a flange back onto the trunk pan. The trunk pan is stamped with a flange that gets removed when the trunk pan is narrowed. The flange is what the tub is spot welded to.

 

[gtx6970]

North of Tucson AZ.

 

[Belvedere408]

 

[70 sublime]

Before I got mine painted

 

[AR67GTX]

 

[gtx6970]

View attachment 1422051

Looks a little snug in there with 4 cars

 

[AR67GTX]

It is - fortunately it's fairly deep. What you don't see are 7 rolling tool boxes, 2 shelving sets, an air compressor, a 4x3.5' work table, 5 floor jacks plus a rolling transmission jack, and a 2- ton hydraulic press - most of it all up in front of the cars. Takes a lot of orchestration for most mechanical work.

 

[gtx6970]

It is - fortunately it's fairly deep. What you don't see are 7 rolling tool boxes, 2 shelving sets, an air compressor, a 4x3.5' work table, 5 floor jacks plus a rolling transmission jack, and a 2- ton hydraulic press - most of it all up in front of the cars. Takes a lot of orchestration for most mechanical work.

Wow, thats a lot of stuff for a hobbiest ?
Formerly in the auto trade maybe

 

[Islandkent]

How big a area? Does look well thought out. Use what you got!

 

[AR67GTX]

It’s roughly 25 x 25. I have four 6-drawer tool chests end to end along the back wall with a long countertop on top for a bench. Also a shelving unit broken down to make a 4x3.5’ work table. And the three other tool boxes of various size scattered about and the 2 sets of 8’ high shelves. I have everything up on casters so I can shift it around. Being somewhat short of space and a tool junkie it didn’t take much to fill up all the drawers and shelves. I have a large, floored attic with a staircase so I’ve stashed a bunch of stuff up there too. My wife didn’t discover that for years. I’ve tried to make the best of it as I couldn’t get her to move further out where I would have room for a proper shop.

It‘s cozy. I really envy the guys with a real shop.

A little overflow into the other garage.

 

[Fran Blacker]

WOW a lot of stuff but WELL organized. Unlike the guy in my garage.

 

[Outlaw525]

 

[Islandkent]

Had to raise my door opener up a little. Now that I put the door handles on, they were just rubbing when I spun her around. That should do it.

 

[khryslerkid]

 

[hemi71x]

*

 

[gtx6970]

It’s roughly 25 x 25. I have four 6-drawer tool chests end to end along the back wall with a long countertop on top for a bench. Also a shelving unit broken down to make a 4x3.5’ work table. And the three other tool boxes of various size scattered about and the 2 sets of 8’ high shelves. I have everything up on casters so I can shift it around. Being somewhat short of space and a tool junkie it didn’t take much to fill up all the drawers and shelves. I have a large, floored attic with a staircase so I’ve stashed a bunch of stuff up there too. My wife didn’t discover that for years. I’ve tried to make the best of it as I couldn’t get her to move further out where I would have room for a proper shop.

It‘s cozy. I really envy the guys with a real shop.
View attachment 1422451View attachment 1422452View attachment 1422453

A little overflow into the other garage.

View attachment 1422454

Whats your ceiling height.
I have a 3 car attached and with lifes other stuff in there Im not sure I can get 3 cars in it right now.

Ive thought about a lift for the single side . Just not sure my ceiling is tall enough to get a lift high enough to clear one under it

 

[70 GTX-R]

 

[Cheapsunglasses]

45 years of adventures

 

[khryslerkid]