Whelp, Hemi is out for a cam change. Trans will be gone through cuz it is already out. Might as well do the hydraulic throwout bearing too. Need a few opinions on what kit to use. Maybe the kit from Brewer’s? Thanks in advance. Scott
Not to sound dumb but is there room for the master cylinder for the clutch pedal etc. with a Hemi in there? I am coming over from BBC Chevelles so these Mopars are alien beings.I can attest to the ease of installation and excellent function from the Wilwood master cylinder and throwout bearing as supplied with the Silver Sport Overdrives Tremec 5 speed kit. If they offer a setup to work with an 833, it would be a nice improvement over the stock linkage and bushings.
Smooth, linear action and modern car feel.