charger_1968
Well-Known Member
I have a set of Indy cylinder heads from a project car i bought so I know nothing about them other then no modifications or damage from blow ups
I dis-assembled them, de-greased , wire wheeled and was going to lapp the valves in with lapping compound, but i believe they might need to have the valve job
touched up. also it looks to me like the bowls on the intakes could be blended for better flow?
Im selling the heads with valves, springs retainers, but im missing 2 valve keepers, RB valley plate and ARP studs, and oil feed lines.
Happy to supply and other pics asked for..located in Southern California
$1800 plus shipping
I dis-assembled them, de-greased , wire wheeled and was going to lapp the valves in with lapping compound, but i believe they might need to have the valve job
touched up. also it looks to me like the bowls on the intakes could be blended for better flow?
Im selling the heads with valves, springs retainers, but im missing 2 valve keepers, RB valley plate and ARP studs, and oil feed lines.
Happy to supply and other pics asked for..located in Southern California
$1800 plus shipping
Last edited:
