- Local time
- 4:42 PM
- Joined
- May 14, 2011
- Messages
- 17,264
- Reaction score
- 32,489
- Location
- On the Ridge, TN
I'll ask a probably obvious question here....
If a crank isn't drilled for a 4 speed, is it even possible to install the transmission
(complete with the little nipple on the end of the input shaft, uncut) behind it?
If a crank isn't drilled for a 4 speed, is it even possible to install the transmission
(complete with the little nipple on the end of the input shaft, uncut) behind it?