Is this correctly assembled

[themechanic]

I had the anti-rattle spring backwards on one side. Took it apart, turned the spring around and put it back together.

My kit did not include new anti-rattle springs. So, good thing I kept all the old parts until I am sure they're going to work.

 

[4mulas]

You may find it challenging hooking the park brake cable on the lever…. It’s one of the first things I do when doing them on the car

 

[khryslerkid]

the adjuster wheels have little "R" and "L" hidden inside
them so that you can make sure they're on the correct sides - take them apart and look down
inside and you'll see them

 

[themechanic]

You may find it challenging hooking the park brake cable on the lever…. It’s one of the first things I do when doing them on the car

Axles are out for new bearings. So, I thought I would try doing it this way.

 

[Fran Blacker]

When the adj lever go up it should catch the flat part of not the angled part of tooth. See KK's pic. Think you'll need to pull it apart to hook up as PRND21 pointed out.

 

[themechanic]

Both sides turn the adjusters when I pull on the cables. Looks like they're working.

 

[Fran Blacker]

Axles are out for new bearings. So, I thought I would try doing it this way.

Have fun with that.

 

[themechanic]

Park brake cable?

Going to connect parking brake when the backing plates go on the housing.

 

[themechanic]

Have fun with that.

In my book it ain't done right if it's not done twice.