FOUND Kickdown arm clip

[Jeff Peterson]

This is for a truck with a 727, it has a ball stud on the arm, and the rod coming down has a square block with a socket for the ball, in this pic the hole is where the rod goes through, I need the steel clip the bolt is going through, this is the only pic I could find and it doesn't show the other side that has a
"vee" to hold the ball in the socket, Thanks.

 

[QuickBpBp]

This is what I believe you are looking for.. I don't have any spares it was just to help you find what you need..

 

[hemi71x]

Jeff Peterson
Pretty sure i have what your after.
A better close up picture from my "kickdown rod" ad that's currently running in the mechanical parts, for sale section.
Appears that there are slight differences in those parts.
I would have to sell you the complete bolt and block assembly, as breaking it apart will leave me with nothing sale able.
If your interested, send me a pm through this forum, and i will give you my regular e mail address.
Jim V.
hemi71x
FOR SALE - Kickdown Linkage Parts For Automatic Transmissions. Many Year & Engine Sizes.

 

[Jeff Peterson]

Sorry but that’s not what I need

 

[hemi71x]

Ok, but you better find a picture of what your after, looking for, as it appears that everyone is having a hard time figuring out exactly what your looking for.
Me included.
But i thought i might have been able to help you out.
Guess, not.

 

[Jeff Peterson]

Here’s another photo, very unique setup, you have to visualize the rod going through it, but it has a ball stud on the arm like the cable setups, but has that square block with the socket and the bolt on clip to retain it

 

[Jeff Peterson]

This is for a 92’ W350 I just acquired and it snapped off, looked at my ‘84 W150 and it looks like a car style with a cotter pin

 

[s/w theo]

I have a 90 Ram Charger that I'm stripping, I'll check to see if it has that kind. May take a couple days though.

 

[s/w theo]

I checked the one on my Ramcharger yesterday and I believe it IS the one you need. I will try to have it removed by this weekend without ruining it. I will send a good picture of it.

 

[s/w theo]

I think this is what you need. Crummy shots as it's still on the truck.

 

[Jeff Peterson]

PM sent

 

[s/w theo]

Here's those 2 pics.

 

[Jeff Peterson]

That is what I need!
PM sent, Thanks