Volatile Rob
Member
- Local time
- 5:51 AM
- Joined
- Apr 24, 2012
- Messages
- 10
- Reaction score
- 8
- Location
- Perth, Western Australia
Howdy All,
Is anyone running this sump on their swap?
I have run into clearance issues with my OEM front sump fowling on the steering rack and pushing the engine mounts forward roughly 6" of the crossmember.
The IFS system was built by Scott's Hotrods and designed to run a front mount steering rack with the OEM front sump... Unfortunately they don't bother answering my emails or even phone calls...
I am was hoping someone might be able to measure the MILODEN 31003 sump so that I can work out if the Mid-Sump arrangement will fit between my crossmember & the rear mounted sway bar, as pictured below:
[/URL][/IMG]
Thankyou all
Rob.
Is anyone running this sump on their swap?
I have run into clearance issues with my OEM front sump fowling on the steering rack and pushing the engine mounts forward roughly 6" of the crossmember.
The IFS system was built by Scott's Hotrods and designed to run a front mount steering rack with the OEM front sump... Unfortunately they don't bother answering my emails or even phone calls...
I am was hoping someone might be able to measure the MILODEN 31003 sump so that I can work out if the Mid-Sump arrangement will fit between my crossmember & the rear mounted sway bar, as pictured below:
Thankyou all
Rob.
