• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD Mopar 318ci/poly cam shaft & lifters NEW $300 FREE shipping

Status
Not open for further replies.

LongR

Well-Known Member
Local time
6:54 PM
Joined
Feb 11, 2024
Messages
122
Reaction score
28
Location
02889
Feedback: 1 / 0 / 0
Contact seller
cam=264 degrees duration, .450" lift, 108 degrees lobe centers (separation), 222 degrees duration at .050" lift.
lifters Federal Mogul AT-2084 (16) of them
comes with both lubes

PXL_20240218_153154328.jpg


PXL_20240218_131105372.jpg


PXL_20240218_160711782.jpg


PXL_20240218_161447348.jpg
 
Last edited:
I'm not trying to be an asshole, but it looks like a poly cam to me, which will not work in the more common LA 318, or any LA.
 
I'm not trying to be an asshole, but it looks like a poly cam to me, which will not work in the more common LA 318, or any LA.
I love the help......what does LA mean ??? I have a 66 Satellite w/318 and purchased these parts with the intention up boring .030 over to achieve a little more power ...............change my mind...now I want to sell the parts
 
To be clear, the 1966 318 was still the POLY version, the A engine, not LA.
 
In 1967 in the U.S. the 318 went to the LA design, the same as the 273. The heads were totally different from the poly that preceded it. The valve layout was different, which is why the poly cam won't work in an LA. There would be some intake valves with exhaust timing and vice versa.
 
Poly cams are not super easy to come by, or cheap.

That's a nice grind for a "one or two steps up from stock" build.

Why does it look like the lobes are not fully machined?
 
Status
Not open for further replies.
Auto Transport Service
Back
Top