Mopar enthusiasts needs 440 help

[Texas charger 73]

I recently picked up a 440. It's bored .30 over and crank is .30/.30. Ly Rods have been butchered and Keith black hypers have been beat-up. I am on work comp from a work injury last year where I fell 20' and had to learn to walk again. Anyone have any rods or pistons laying around not using or any other cheap 440 parts. It has a steel Forged crank # 220-6160. I also need a 440 oil pan that will fit and clear a 73 B Body. I think it's pan number 971. Any help or work with me be awesome. Have 452 heads on it. Gotta get cam, intake, valve covers, rockers,

 

[5.7 hemi]

Pm sent.

 

[Matrix2]

I have a bunch of stock 440 parts, LY rods, stock pistons (used), stock heads, rockers arms, rocker shaft, pushrods, water pump but no valve covers. Also have a distributor and coil. All off an engine that I bought that was supposedly working, but obviously not, so took it all apart, using the steel crank and block for a build in the future.

 

[62 Dart Convertible]

I am on work comp from a work injury last year where I fell 20' and had to learn to walk again.

Gee, you are lucky you are still on earth mate!

Good luck, and with your build too!!

 

[Texas charger 73]

Thank you sir. Yes it has been a tough recovery but building this car has been very therapeutic