Did some research and I know I need Dorman part number 610-446 for the rear but I can’t find a part number for the front longer wheel studs for my 70 Charger disk brakes. Probably need the same length as my rears. Any help would be appreciated.
I figured the knurl was way to big for the front…HmmmThe ones you listed are .350 longer than stock. I am using them for the front discs and stock length for the rear drums
I’ll agree. It was easy to find what some were using for the rears but I couldn’t find a definite answer for the front because the knurl size is different.We really need a sticky for the longer studs for front drums,front discs, and rear drums. Could add in the same for A-bodies too.
Yeah factory disc but I’ve decided use Baer 13” front Disc so I’ll get the correct studs then. The 610-446 worked perfect for the back. Thanks for the help though.Do you have factory front disc brakes? The size needed for the disc hats Cass sells (77-79 Aspen), Dorman 610-449. These have a smaller knurl than the rear factory drum brakes.