Carbs are fit. Looks like it'll take 1/4" carb spacers above the manifold adapter plates to make all the linkage clear. That puts the carbs air filter base 1/4" above the level of the hood. I'll have to get creative. Have 120 degree fittings coming for the fuel lines at the carbs. New braided throttle cable will make the 90 degree turn to the carbs. Have to fab up a bracket. The brackets that hold the cross carb pivot bar place the heims to low. The rear heim and carb pivot arm hit the intake. I'll mill the pivot arms to raise the heim location. Of course the carb linkage hits the intake and the blow off plate springs. Cut and grind the linkage on my new high dollar carbs. The springs and studs on the blow off valves get the axe. Nylon screws with the the heads drilled and thinned take their place. It's only a carb swap, right?
Doug
Doug