How do you remove the lead plugs at the base of the outer carbs on the 6 pack setup? would 1/2 turn out be the base to start at? thanks.
Yes, yes they are!when removing the plugs that you don't turn the screws!!!... the screws are very sensitive. Much more than the center carb.
That is an option, but with the amount of tuning I have had to do initially, and with all of the future tuning I'm going to have to do what with the Weiand 6bbl intake, and stroker motor plans, I wish I would have had the angled idle mixture screws throttle plate as one of my first purchases years ago.Tune the outer carbs from the front position.
Do the rear first, swap them, then tune the front.
Dam for $175 you would think it would be good to go.Even with the Promax base plate, you still need to grind the float bowl for the screw driver access.
View attachment 954245
You can get away with a skinny angled screw driver.Dam for $175 you would think it would be good to go.