Chase383
Well-Known Member
Contact seller
Hey Guys,
My parts car is seriously cramping my available space, so I need to get rid of the good parts. Only the items listed below are available, everything else is rotted beyond belief or I will be using it on my 71 Plymouth. Prices below are less shipping, I don't mind shipping small parts, but I can't ship the sheetmetal and running gear. I wish I could, but their is not a local Greyhound and Fastenal is in the a couple cities over. I work 60 hours a week so I asked interested parties to be patient with me.
NOTE: any interested parties that are close to me, if you are interested in large portion of the parts below, I will give a substantial package discount if you want to come over, talk Mopars and help me pull the parts of this car in the sweltering Gulf Coast weather.
Flat Hood (has some filler in the leading edge) $50
Vertical support, latch plate and hood latch $25
Both Front Fenders, with headlamp buckets and hardware (Rt fender has typical lower rust, Lt Fender has some filler on the top) $300 each
Front and Rear Valace panels (both are dented up) $75 for the pair
Both front and rear bumper assemblies including brackets $50 each
Front Grilles (Rt side cracked) $50 for the pair
Rt Door shell (seems to be pretty rust free) $100
Lt Door shell is kinda rusty, you can have it for free if you buy the Rt Door
Rocker Moldings (set, thin style) $65
Both Lt Side Wheel opening moldings $ 50 for both
Leading edge Hood/Fender Stainless (missing RT fender piece) $75
Stainless Molding for back of Hood/Fenders (complete) $90
Inner and Outer Drip Rail stainless (complete, both sides) $150
Wide Stainless Moldings for Doors and C-pillars (complete) $125
Full Vinyl Top Trim (missing Rt qtr panel piece) $75
Rear Window Stainless (embossed style for vinyl tops, top two pieces only) $50
Rear Qtr Fillers with stainless moldings $75 for both
Complete set of Side Markers $75
Complete 71 and up Slapstick shifter and linkage (Handle cracked) $75
71 318 2 barrel and 904 trans, this engine is largely unmolested and even has the original air cleaner on it. It does crank and tries to fire on with starting fluid... I have no idea of its internal condition. $100
8 1/4" rear axle, minus drums and shock plates $50
Think a price is too high? Never hurts to shoot me an offer, what ever I sell will help my other two Mopars in need. I don't want to throw good (or at least, usable) parts in the trash. Ever feel crushed when you find out somebody else pitched the part you needed... me too.
I'm all for horse trading, if you have '71 Roadrunner or '68 Coronet parts, let me know.
My parts car is seriously cramping my available space, so I need to get rid of the good parts. Only the items listed below are available, everything else is rotted beyond belief or I will be using it on my 71 Plymouth. Prices below are less shipping, I don't mind shipping small parts, but I can't ship the sheetmetal and running gear. I wish I could, but their is not a local Greyhound and Fastenal is in the a couple cities over. I work 60 hours a week so I asked interested parties to be patient with me.
NOTE: any interested parties that are close to me, if you are interested in large portion of the parts below, I will give a substantial package discount if you want to come over, talk Mopars and help me pull the parts of this car in the sweltering Gulf Coast weather.
Flat Hood (has some filler in the leading edge) $50
Vertical support, latch plate and hood latch $25
Both Front Fenders, with headlamp buckets and hardware (Rt fender has typical lower rust, Lt Fender has some filler on the top) $300 each
Front and Rear Valace panels (both are dented up) $75 for the pair
Both front and rear bumper assemblies including brackets $50 each
Front Grilles (Rt side cracked) $50 for the pair
Rt Door shell (seems to be pretty rust free) $100
Lt Door shell is kinda rusty, you can have it for free if you buy the Rt Door
Rocker Moldings (set, thin style) $65
Both Lt Side Wheel opening moldings $ 50 for both
Leading edge Hood/Fender Stainless (missing RT fender piece) $75
Stainless Molding for back of Hood/Fenders (complete) $90
Inner and Outer Drip Rail stainless (complete, both sides) $150
Wide Stainless Moldings for Doors and C-pillars (complete) $125
Full Vinyl Top Trim (missing Rt qtr panel piece) $75
Rear Window Stainless (embossed style for vinyl tops, top two pieces only) $50
Rear Qtr Fillers with stainless moldings $75 for both
Complete set of Side Markers $75
Complete 71 and up Slapstick shifter and linkage (Handle cracked) $75
71 318 2 barrel and 904 trans, this engine is largely unmolested and even has the original air cleaner on it. It does crank and tries to fire on with starting fluid... I have no idea of its internal condition. $100
8 1/4" rear axle, minus drums and shock plates $50
Think a price is too high? Never hurts to shoot me an offer, what ever I sell will help my other two Mopars in need. I don't want to throw good (or at least, usable) parts in the trash. Ever feel crushed when you find out somebody else pitched the part you needed... me too.
I'm all for horse trading, if you have '71 Roadrunner or '68 Coronet parts, let me know.