Post your 9 second or Faster combo's
- Thread starter alleyoopmgv
- Start date
- Local time
- 7:37 AM
- Joined
- Jan 16, 2011
- Messages
- 70,764
- Reaction score
- 102,216
- Location
- NorCal Sierras
more information & photos on that car please, 69 RR GTX Sat. or Belv. ?
welcome to FBBO
also maybe go to the welcome wagon forum section
& do an introduction, maybe some background etc.
My car made 938 rwhp on my dyno today but not a mopar unfortunately. Still cool as heck tho.
Hemirunner
Well-Known Member
This will be my year to get out of the nines... @dvw , did you start an 8 seconds or faster thread yet?
Get that 60ft down and you'll have it easily.
Hemirunner
Well-Known Member
That's what my car mph at in the 1/8, and that is solid in the 8s in the 1/4 unless you have something losing power on the back half.
Hemirunner
Well-Known Member
Nothing losing power. I’m only at 17psi on those runs. I think it’ll go 170 in the quarter when it’s turned up.
Reason I asked is mine was losing power, figured out the issue now, can't wait to try it out.
Hemirunner
Well-Known Member
What did you find?
Replacing valve springs. Then back on the dyno, believe that's the fix.
As you can see, at 19 psi it loses 500 hp from 6700 to 7200, but at 15 psi it just dips, then recovers, and only makes 90 less hp. So I believe the cut rate springs I used are the culprit. Car felt like someone covered the turbo inlet at 900 ft.
I'll update ya when I make the swap and get back on the dyno. Thanks.for asking.
birdflew
New Member
Buddy of mine ran a 7.90 last weekend in a 70 challenger.
Then opened the bottles and crushed the guts in the PG...and it's no 2 dollar transmission
Then opened the bottles and crushed the guts in the PG...and it's no 2 dollar transmission
theman440
Well-Known Member
440 based, 493ci , 12.2:1 compression, ported Indy EZ heads, T&D rockers, custom Hughes solid roller, 1050 CFM carb, standard gear ratio 727 with stock internals (foot brake) 8 inch ATI converter, Dana w 4.56's, 9inch slicks, race weight 3650lbs. First weekend out with new motor - 9.94 @133mph. Best 60ft was 1.37 on 7 year old worn out tires.
Last edited:
HEMI-ITIS
STREETER on LI
- Local time
- 10:37 AM
- Joined
- Dec 14, 2008
- Messages
- 12,931
- Reaction score
- 17,758
- Location
- Long Island,New York
LOL,looking for an 8 second slip!
New band and drum. Dialed the 1st kit way down, 7.60.
Then blew off a converter bolt boss( unused) and it hit the ground a fired right through the floor pan. Tranny comes out again.
Schober Motorsports
Well-Known Member
I've been waiting to post to this thread since I joined this forum back when I bought the car haha.
67 Coronet, 505 BBM, Trick Flow 270s, 1050 Dominator, 13:1 Compression, Off the shelf Solid Flat Tappet, 10.5 radials. Weighs 3421 with me in it.
Best run to date is 1.370 60 ft; 9.70 1/4 mile @ 136 MPH. Nice to finally be in the 9 second club
Raced a Hellcat one night at a test and tune in the video below... Man those cars are FAST!
67 Coronet, 505 BBM, Trick Flow 270s, 1050 Dominator, 13:1 Compression, Off the shelf Solid Flat Tappet, 10.5 radials. Weighs 3421 with me in it.
Best run to date is 1.370 60 ft; 9.70 1/4 mile @ 136 MPH. Nice to finally be in the 9 second club
Raced a Hellcat one night at a test and tune in the video below... Man those cars are FAST!
rumblefish360
Well-Known Member
I've been waiting to post to this thread since I joined this forum back when I bought the car haha.
67 Coronet, 505 BBM, Trick Flow 270s, 1050 Dominator, 13:1 Compression, Off the shelf Solid Flat Tappet, 10.5 radials. Weighs 3421 with me in it.
Best run to date is 1.370 60 ft; 9.70 1/4 mile @ 136 MPH. Nice to finally be in the 9 second club
Raced a Hellcat one night at a test and tune in the video below... Man those cars are FAST!
View attachment 1544032
What’s the cam specs, actual tire size, intake manifold used, trans and converter stall and finally, your gear ratio.
After all, some guys wanna know what it takes and if they copy you, it’s a sincere compliment to you.
Similar threads
