Najib
Well-Known Member
So after a sandblast and a front end rebuild and a front end paint job and a quick primer to keep it from rusting here it is. I defintly wish that i masked off my side windows better. I pieced my front end kit from rock auto together with some decent parts. It turned out decent. I am getting ready when I get back from my business trip to get sherman quater panels and weld them in. I did an oopsie when i was rolling the car back in from primering it. At the time the front end was stripped down and had some sort of bright idea to use a engine crane to roll around the car and had the front fenders on to primer it and as I was rolling it in the crane fell on its side. Luckly my front fenders werent in the best condition anyway. it bent the passenger side one like crazy. Anyhow, since engineswaps .com hasnt had 440 conversion mounts for a while now i have a cracked 440 block that im going to use as a template for mounts. As for the floor pans im probably going to order both sections soon here and when i get back im gonna weld it in along with the quaters. When thats done im probably going to throw in the fuel system and the engine and trans once its all done and wire the car up and im going to try the cold case radiator to see how she does.