pulling my six

[MarPar]

I hope you go with 2-1/4" pipes? Looks like you got split headers and a 4 bbl on there, nice! Mine's stock except for the super 6 and a Weber 32/26 on it, nuthin fancy on my BamBam. See my tagline below!

I think they are 2 1/4". dual pipes. sounds like a nest of hornets at full throttle though. sounds like ****. I need to change it, but I dont know what to change it to. keep duals? single 2 1/2"?

 

[67belvedere/225]

it s not what you have have its, how you hop it up and make it go, i flew by a new mustang on the highway
the guy pulled up to me at the light and said , that thing sound awesome is it a v8 , nope 6
he was like that is so impressive from that big car ,

 

[69a100]

I think they are 2 1/4". dual pipes. sounds like a nest of hornets at full throttle though. sounds like ****. I need to change it, but I dont know what to change it to. keep duals? single 2 1/2"?

What muffs you runnin? I had the cheap Summit turbo on mine and after 6 months it looked like someone stuck a stick of TNT in it, blown to snot. I went with a Marrimont turbo again from Summit. They sent me a 2 1/2" in & out so I'm runnin 2 1/4 pipe with 2 1/2 muffler. Sounds stock evn at WOT and I'm sure my back pressure is close to zero. I think 2 1/2 is to much on a /. There's tons of info over on /6.org, I lurk more then I post over there, but read stuff everyday, maybe do a search over there? Keep us in the loop on this.

 

[MarPar]

What muffs you runnin? I had the cheap Summit turbo on mine and after 6 months it looked like someone stuck a stick of TNT in it, blown to snot. I went with a Marrimont turbo again from Summit. They sent me a 2 1/2" in & out so I'm runnin 2 1/4 pipe with 2 1/2 muffler. Sounds stock evn at WOT and I'm sure my back pressure is close to zero. I think 2 1/2 is to much on a /. There's tons of info over on /6.org, I lurk more then I post over there, but read stuff everyday, maybe do a search over there? Keep us in the loop on this.

these muffs....

 

[69a100]

these muffs....

View attachment 505839 View attachment 505840 View attachment 505841

That would explain why you hate them.

 

[67belvedere/225]

im running the clifford headers to a x pipe and (2 1/4 ) all the way to flow master muffler dual in and 2 1/2
single outlet , it s gotta drone sound at 60 but now with the new tranny with the high stall and lock up i expect it to rev lower and less drone where im cruising at , if not i will add a resonator

 

[67belvedere/225]

here is more pics ad the crank , im going to put oil pan on monday and hope to have her for the long weekend

 

[MarPar]

I may just try an x-pipe like you have, 67. I think my /6 flows too freely. Though the more economical (read:cheaper) alternative would be to switch out my flowmasters for a more stock-ish (longer) muffler. Im probably not going to be able to dig into it until winter, so I have some time to research it.

 

[67belvedere/225]

got the oil pan gasket rear seal glued on over night , and pics of old tranny and new

 

[Mopar Man 73]

Here's mine, early B-body with a hopped up 225 /6.

 

[67belvedere/225]

Here's mine, early B-body with a hopped up 225 /6.

View attachment 507750 View attachment 507751 View attachment 507752 View attachment 507753 View attachment 507754 View attachment 507755 View attachment 507756 View attachment 507757 View attachment 507758 View attachment 507759

yeah you went big on the engine innards
nice rods $$$

 

[Mopar Man 73]

Thanks, I have several other nice goodies inside the engine as well. I'll try to post them as soon as I find the pics.

 

[67belvedere/225]

Thanks, I have several other nice goodies inside the engine as well. I'll try to post them as soon as I find the pics.

Tease me why don't you, I see you live in the I.E.
I m going in December to see my nephew who lives in rialto. would love to see your car put down a patch

 

[MarPar]

nice rods

Tease me why don't you, I see you live in the I.E.
I m going in December to see my nephew who lives in rialto. would love to see your car put down a patch

video anyway lol

 

[Mopar Man 73]

Keep in touch, I'm hoping to have it up and driving by then and having fun with it. Wouldn't mind showing it off in person.

Here's a couple more pics I found to share. I will see what else I can dig up and post.

 

[67belvedere/225]

she s back in action , the lock up torque now on the back of her is driving much better
at 60 mph it s revs @2500 and 75 mph @ 3000
i think i will wit;l drop the gears in the diff to 355 instead of the 2 94 have a lil more fun talking off

 

[Mopar Man 73]

Looking great! Glad it's running better now.

 

[MarPar]

sweeeeet. do ya have a vid of her running? possibly one out on the road?

 

[67belvedere/225]

its pissing rain today , but i will take a video, and post it ,

 

[67belvedere/225]

just a short blast on highway