• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Rear end identification

LongR

Well-Known Member
Local time
2:51 AM
Joined
Feb 11, 2024
Messages
116
Reaction score
27
Location
02889
Is this a 8 3/4" w/"Sure Grip"

PXL_20240322_140230669.jpg
 
Its a 741 8 3/4 case but may or may not be a sure grip. You'd have to look in the carrier to see
 
So 741 8 3/4 cases are not all sure grip ???....It was an option ?????
 
Wont know if its limited slip until you jack it up and see if it is.
You have to jack it up (or look at it if it's on the bench) What car is it in?
 
Unless your car came with a Dana, a sure grip was always an option. I would think 741 open diffs would far out number 741 sure grips.
 
Toss it in the air and spin a wheel or axle. If they rotate in the same direction, LSD. If opposite, open/non/pegleg.
 
Auto Transport Service
Back
Top