SPEEDYRT1
Well-Known Member
hey what should i use to protect inside rear frame rails after sand blasting , before i put , trunk @ transition pans back in the car ?
ok that's what i was thinking , thanks !Considering these were never painted from the factory, any good epoxy primer would be good.
yep already bought a can from napa,thanks !Don't forget the weld thru coating on the lap areas
ok thanksWe have alway's used Dupont self etching primer inside the rail's, and used SEM weld thru on the joint's to be welded. Sometime's we paint body color down inside the framerail's before installing them. Good luck.