I mounted the retractor on the diagonal bracing with a big a$$ seat belt washer and grade 8 hardware. I figure if that doesn't hold in an accident, then it was so bad that no one would have survived anyway.
Rear shoulder belts in a 1970 Charger
- Thread starter Kern Dog
- Start date
furious70
Well-Known Member
I welded it to that brace in my cars
Coelacanth
Well-Known Member
- Local time
- 4:13 AM
- Joined
- May 10, 2024
- Messages
- 1,826
- Reaction score
- 3,019
- Location
- Edmonton, Alberta, Canada
I'd be interested to see your (or someone's) setup that added back seat shoulder belts. I see those slots on my '70 Charger and it would be nice to add the extra safety for the rear passengers. What retractors and belts did you install?
- Local time
- 3:13 AM
- Joined
- Apr 13, 2012
- Messages
- 40,340
- Reaction score
- 144,696
- Location
- Granite Bay CA
I copied your pictures:
I see here that the mounting position is square with the opening in the package tray.
- Local time
- 3:13 AM
- Joined
- Apr 13, 2012
- Messages
- 40,340
- Reaction score
- 144,696
- Location
- Granite Bay CA
I am curious as to HOW the seat belts are installed.
Bolting up a retractor is the easy part. The hard part is how do you get a belt through the horizontal slot when both ends of the belt have something attached to it? On one end is the retractor mechanism. On the other is the metal end that attaches to an anchor in the floor of the car. In between you have the buckle itself. I can't see how the belt can go through the package tray with the buckle in place.
Bolting up a retractor is the easy part. The hard part is how do you get a belt through the horizontal slot when both ends of the belt have something attached to it? On one end is the retractor mechanism. On the other is the metal end that attaches to an anchor in the floor of the car. In between you have the buckle itself. I can't see how the belt can go through the package tray with the buckle in place.
Similar threads
