Sheetmetal question.

[chrger1967]

What Sheetmetal do I need to repair the sections where the lower fenders bolt too? I have the lower fender patch panels, but it looks like I need the inner fender braces as well. I'm just not sure what the sections I need where the fenders bolt up to. I've been looking on AMD's website, just unsure of what else I need. Thanks guys.

 

[BeepBeepRR]

outer rocker panels and or inner rockers depends on how much rust you have.

 

[chrger1967]

outer rocker panels and or inner rockers depends on how much rust you have.

outer rocker panels and or inner rockers depends on how much rust you have.

This is what I was mentioning. Aren’t the rocker panels below the doors?

 

[R413]

That is a splash shield that bolts in. Find the bolts with large washers, take them all out and see how large it is.

I circled two bolts and the edge is between the two vertical lines.

 

[chrger1967]

That is a splash shield that bolts in. Find the bolts with large washers, take them all out and see how large it is.

I circled two bolts and the edge is between the two vertical lines.

View attachment 1991748

Are they being repopped?

 

[chrger1967]

Are they being repopped?

Is this what you mean?

 

[BeepBeepRR]

I thought your were talking about the bolts that go into the pinch weld area. Looks like the splash shields are only made for 68-70 B-Bodies from AMD.

Fender Splash Shields - Pair - 68-70 Plymouth B-Body

Auto Metal Direct fender splash shields are constructed from quality materials and come in a range of applications. These fender splash shields provide your ride not only with a nice appearance, but most importantly protection from dust, dirt, road debris, and worst of all water that gets kicked...

www.autometaldirect.com

 

[RemCharger]

Is this what you mean?

View attachment 1991757

Just get the splash shields out and blast em, clean em. See what's left.

 

[chrger1967]

I thought your were talking about the bolts that go into the pinch weld area. Looks like the splash shields are only made for 68-70 B-Bodies from AMD.

http://[URL]https://www.autometaldirect.com/fender-splash-shields-pair-68-70-plymouth-b-body

[/URL]

Yeah, that's what I'm seeing as well.

 

[R413]

I don't keep up with repops. It is a 2.5 foot tall panel, about 6" wide held on with many bolts.