Brewzer67
Well-Known Member
Hello all, I am going to be sending the Coronet off for paint and a few rust touch ups. The car is currently black and will be repainted black to correct some other issues with the original job. I am looking for advice on what paint to use for the project. I am looking for the deepest black that's out there. I am not sure what they used the first time but it has always had a slightly brown tint to it in certain lighting so I am looking to eliminate that. As far as the clear goes, I am looking for something that will look extra deep but will be a little tougher than the last job as well. Anytime I used my cotton fender covers I would have to re-polish the fender to bring it back. I am guessing there was an improper hardener mix used because it seemed like it never truly set up.
I plan on going with some colored stripes again if that comes into play...
I've attached photos for the before examples. I'm not so much worried about price as I am about durability and quality.
Any advice would be appreciated.
I plan on going with some colored stripes again if that comes into play...
I've attached photos for the before examples. I'm not so much worried about price as I am about durability and quality.
Any advice would be appreciated.