• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Transmission noise

roadrunnerman

Well-Known Member
Local time
9:38 PM
Joined
Feb 28, 2010
Messages
5,298
Reaction score
1,116
Location
iowa
This just recently started on my 85 p/u. When the truck is idling in park or neutral there is no noise, but if you put it in gear (reverse,drive) and start driving then there is a low resonating hum and a slight vibration. I had my wife start the truck and put it in gear and hold the brake while I got underneath and could hear the noise and when I put my fingers on the bottom of the housing where the torque converter is, I can feel it vibrate really good there. There is no leaks under the truck where it sits. The motor is a 360 with a 727 tranny (auto). Is it my front pump going out or is the TC on its way out?
 
Thanks, went and got one from precission torque convertors. $84 out the door for a stock one. It is the second one I bought from them in a week. The first one was a 2200 stall for my RR. Good people over there.
 
Back
Top