• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Treating inside loose front frame rail by pourable coating?

68_661charger

Well-Known Member
Local time
6:20 PM
Joined
Jan 9, 2022
Messages
182
Reaction score
345
Location
Plainfield, IN
Im replacing the front drivers rail on my 68 Charger with another used rail. Im going to soak the rail in cleaner then evaporust. Im kinda thinking I want to just pour a looser coating in the rail standing on end and move it around to get the coating past all the internal chambers in the rail. My undercoating gun wont reach through the boxed parts of the rail. What primer or paint would be good enough? Rustoleum primer and paint?
Is epoxy pourable?
Rust bullet or POR type product?
Thanks in advance.
 
You can finish off the exterior areas and get those looking good , then spray wax the insides , they do have long tubes for the gun for getting in tough areas. Spray wax or what ever you use will still collect dirt. But prevent moisture from seeping
 
Auto Transport Service
Back
Top