TTI or Dougs headers??? I've got to know what to buy!

[Torkmnstr]

So have at it boys, which one. I am liking at 2" primaries, tti are nice but a big buck to spend especially ceramic coated. I can get Dougs coated for almost a third of the cost and just as great construction. Thanks all.

 

[monaco66coupe]

Can't speak for Doug's headers. TTI's are awesome.

 

[Propwash]

I run a set of the 2" Doug's 452's on my RB 512. Both fit and construction are real good. I bought the bare headers and had them ceramic coated black locally.

 

[HYRDGOON]

I have the same set as prop but bought mine already ceramic coated. Agreed fit and construction are great... didn't have to make any dents or force anything to fit

Here' a pic of my Doug's... now don't tell me those aren't pretty!

 

[mentor70]

never tried Dougs, TTI is close to me for local will call, and ive used them before...no drama, fit right.

 

[super-bee_ski]

TTIs for Mopar

 

[hunt2elk]

I have TTi's on my Charger with a 440. I had to jack the motor up a bit to get one side installed - no big deal though. I also have a set on my 451 in the Road Runner. These went in real nice with no motor lifting required. I did have to grind a small corner off my bell housing on the passenger side for this set to fit. The only complaint I have is that both sets are very close to the trans crossmember on the drivers side. On the Road Runner and the B engine I was not able to use a band or u-clamp on the collector to h- pipe on this connection. I stuck a pry bar in this area, tightened everything else up, and welded this joint.

 

[Torkmnstr]

Thanks for the feedback guys. I think I will go with Dougs but in the black ceramic coat...

 

[ctreser]

I'm in the middle of installing Dougs ceramic coated 452's in my 66 coronet with 440. Passenger side was a breeze and the fit was perfect. I did slap a bunch of painters tape on them to keep from scratching them up and bought a rebuilt mini starter for the drivers side. Got one for a 88 dodge diplomat ($73.00). Can't beat that.

 

[Torkmnstr]

Nice ct, we'll have the d452's coming but in the ceramic black. Can't wait for the added heat barrier from the ceramic!

 

[383man]

Never used Doug's but I love my TTI's. Ron

 

[Sonny Black]

tti.......................
Look ma', no gaskets!:icon_winkle:

 

[ctreser]

Finished the Dougs header installation on my 66 Coronet. They fit like a glove. I had 1 spark plug that was a little hard to get to but all the others were easy. I think I also put a little too much tape on to keep from scratching them and was a little bit of a pain to get off. I'm a happy camper.

 

[nothingbutdarts]

For TTI headers, would you suggest getting them directly from TTI or might a person buy them at a better cost thru Summit or Jegs and get better customer service of needed?

Thanks!

 

[Mike Gaines]

This is a great thread as I was thinking about a set of Dougs with the 2" primaries and 3.5" collectors. I have the info to now do it. Thanks,MIke

 

[hunt2elk]

For TTI headers, would you suggest getting them directly from TTI or might a person buy them at a better cost thru Summit or Jegs and get better customer service of needed?

Thanks!

Give Bill at Chicago Connection a call. They had the best pricing when I was shopping around.

 

[bigmanjbmopar]

Call Chrysler power They are direct and will give a discount. Just email themm heck he designed the TTI's lol http://chryslerpower.com/webstore/

For TTI headers, would you suggest getting them directly from TTI or might a person buy them at a better cost thru Summit or Jegs and get better customer service of needed?

Thanks!

 

[nothingbutdarts]

Give Bill at Chicago Connection a call. They had the best pricing when I was shopping around.

Bill said he could not discount TTI's but, would ship for free. I'm waiting on a quote from Chrysler Power then I'll decide.

Thank You!

 

[petieg383]

Nice ct, we'll have the d452's coming but in the ceramic black. Can't wait for the added heat barrier from the ceramic!

Can you point me in the direction of black ceramic coated headers? I only see high temp coated which I assume isn't the same as ceramic. Would love to see them. Do they come in any other size besides 2" primaries?

 

[Dennis H]

For TTI, use a vendor. Do not buy direct.