SlinktRR
Well-Known Member
I have a 499 with tf240 heads and a comp solid cam, using stock 1970 valve covers. With the solid I lash valves at least once a year, sometimes more if it gets more noisy than usual so would like a cover gasket that can be reused.
The moroso ones I had just disintegrated after my last valve adjustment so in a pinch I got parts store felpro cork. They actually work pretty well with the stock covers and trick flow, just needed some permatex in the corners around the two outer bolt holes and 25inch/lb torque on the bolts. But not sure how well they will hold up on/off so would appreciate any suggestions, can be expensive as long as they last.
The moroso ones I had just disintegrated after my last valve adjustment so in a pinch I got parts store felpro cork. They actually work pretty well with the stock covers and trick flow, just needed some permatex in the corners around the two outer bolt holes and 25inch/lb torque on the bolts. But not sure how well they will hold up on/off so would appreciate any suggestions, can be expensive as long as they last.