• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Waking up the beast

The high performance valley pan is in and we're off to the races.
 
a "little" wheel up {Singular} , added some actually lightweight racing wheels, instead of them heavy a$$ old steely's....
BUT it looked like the guy in the other lane, seems he walked on you thou... was that just warm ups/practice ??
I'd highly suggest, you do the same on the rear, you'll get a little more wheel speed too & it's easier to rotate the mass, less waste of HP or energy, better breaking, less wear & tear...
what was the times et/mph 60ft ??, spill the beans, what a damn tease
 
I'll guess 11.80's to 11.90's if the air was good and you found your mph.
 
a "little" wheel up {Singular} , added some actually lightweight racing wheels, instead of them heavy a$$ old steely's....
BUT it looked like the guy in the other lane, seems he walked on you thou... was that just warm ups/practice ??
I'd highly suggest, you do the same on the rear, you'll get a little more wheel speed too & it's easier to rotate the mass, less waste of HP or energy, better breaking, less wear & tear...
what was the times et/mph 60ft ??, spill the beans, what a damn tease


i'll reply since BOBTILE is watching gay NASCAR today and he's acting a little slow today. that was a time trial yesterday againt the NENDRA TRACK CHAMPION LAST YEAR.
let's just say 11.8X

- - - Updated - - -

I'll guess 11.80's to 11.90's if the air was good and you found your mph.


Air was very good but we had a 15 mph head wind all day. pretty damn close on the ET though.
 
11.91 and 11.92 @ 110.7. Still down 4 mph . hitting rev limiter at the line. Thinking about going to 6300 chip instead of the 6100 I have now. Still spinning off the line a bit.

60 ft. Were 1.63 and 1.66. Much better even with spinning.

- - - Updated - - -

Thanks to SSR. For the wheels. I think it helped .
 
11.91 and 11.92 @ 110.7. Still down 4 mph . hitting rev limiter at the line. Thinking about going to 6300 chip instead of the 6100 I have now. Still spinning off the line a bit.

60 ft. Were 1.63 and 1.66. Much better even with spinning.

- - - Updated - - -

Thanks to SSR. For the wheels. I think it helped .

Thanks for the #'s, seems it's working allot better... Good luck in the future too
 
Someone went on a diet today.
 

Attachments

  • exhaust.jpg
    exhaust.jpg
    107.8 KB · Views: 271
Back
Top